ZvPro I-Series
The new I-Series of HD encoder/modulators has all the features of any ZvPro, PLUS simultaneous video-over-IP streaming — all with no compromise in performance.
IMPORTANT: A ZVPro cable must be purchased separately along with the ZVPRO 610 in order to connect a component or VGA device to the full-sized DIN input. See below for Accessories and Related items.
Based on the same architecture as their big brothers (HDbridge 2000 Series encoder/modulators), ZvPro models pack powerful features into a small space. At only 1RU high and shelf or rack mountable, it takes just one ZvPro to create a digital TV channel and broadcast it throughout your entire facility.
FEATURESShelf or rack mount - via integral flanges or optional mounting kit
Front-Panel Color LCD - for Configuration and Status
Web-based mangement - local or remote setup and monitoring
Component/VGA input - two choices, from a full sized DIN connector:
- Hydra cables with 7 inputs (component HD video, analog and digital audio) for clean wiring, easy diagnostics and maximum flexibility
- VGA with analog audio input
Analog and Digital Audio - internally encoded and broadcast as AC-3 or MPEG1 Layer 2 Audio Encoding (varies by region)
Integrated Closed Caption support — required for ADA compliance in many applications.
High power output - up to 45dBmV
Strong retention force power connector
Two year warranty
Proudly designed in Massachusetts and Built in the USA
IDEAL USES
Distribute HD video throughout your facility
Replace multiple signage players
Commercial or residential​
Use existing coaxial cabling
Compatible with any HDTV
VIDEO INPUT
YPrPb or RGB Video (1 or 2 ports per model): DIN connector HDbridge end, RCA connectors for HD source
Computer VGA (Analog): HD-15 connector, 75 Ohm RGB 0 to 0.7V, Separate H and V sync
VGA Resolutions Supported: 640x480, 720x480, 800x600, 1024x768, 1152x864, 1176x664, 1280x720, 1280x768, 1280x800, 1280x960, 1280x1024, 1360x768, 1440x900 at 60 70, 72, 75, 85 Hz. 1680x1050 and 1920x1080 at 60 Hz. VGA resolutions are broadcast centered in the best vertical fit into 1920x1080p30 or 1280x720p60.
Closed Caption: EIA/CEA-608 captions accepted over composite video input
AUDIO INPUT
Analog Audio Input: 75 Ohm 0 to 0.7v at Line-level input, RCA R/W Connectors on DIN->RCA Cable, Combined 3.5mm stero connector on DIN-> VGA cable
Digital Audio: Digital S/PDIF on DIN->RCA Cable (N/A on DIN->VGA cable)
Encoding: Internally encoded into Dolby� Digital AC-3 or MPEG1 Layer 2 (varies by region)
VIDEO ENCODER
Encoder Video Profile: MPEG2 HD Profile 2: ISO13818-2 MP@HL
Traffic Shaping: Variable Bit Rate
Video Transport Bit Rate: 49.76 Mbps
Video Encoding Data Rates: Variable, 10 Mbs - 24 Mbs per channel
Average Encoding Data Rate: 18 Mbs per channel
Encoding Latency: Programmable 100 msec to 400 msec
Color Profile: 4:2:0
GOP Size: 24
Video, Audio PID: Programmable
Program Information: Programmable
AUDIO ENCODER
Encoder Audio Profile: ATSC A/52, Dolby(r) Digital (AC-3) or Mpeg 2 layer 1 (varies by region)
MODULATOR / UPCONVERTER
Modulation Types: QAM 256 (ITU-T J83 Annex B) Interleaving modes: (64,2) only OR DVB-C, QAM 256 (ITU-T J83 Annex A) (varies by region)
Cable Standard: HRC, IRC or STD or User defined (varies by region)
Frequency Range: Frequency Agile from 54 to 864MHz
- 2 kHz resolution
- +/- 30 ppm accuracy
- +/- 35 ppm stability
Output Power: +45 dBmV typical
Output Level Adjust: 25 - 45 dBmV in 1dBmV steps
MER: 38 dB typical
I/Q Amplitude Imbalance: < 1% typical
Spectral Tilt: <= 1dB over 6MHz typical
CONTROL / SETUP
Network interface
- 10/100 mb Ethernet via RJ45 connection
- IP address via DHCP or set by user
- HTML/Javascript served web interface for easy configuration
- Telnet connection for CLI scripting
- Easy firmware updates
- All settings saved in NV storage
Front Panel Color Display: Quickly obtain status at a glance
GENERAL
Power: 100-240VAC 50/60Hz, 36W max rated. 18W Typical consumption. IEC 60320-C14
Cooling: Internal cooling fan, Front Inlet, Rear Exhaust
Mounting: Shelf mount flange or rack ears (ordered separately) 1RU high
Enclosure Type: Metal
Enclosure Dimensions: 8" x 10" x 1.75" = 20.32cm x 25.4cm x 4.445cm
System Weight: 3.1 lb (1.4 kg)
Temperature/Humidity: Operating +32F to +113F (0C to +45C) / 10% to 80%, non-condensing
Vibration: NSTA 1A in carton
MTBF: 45,000 hours
Compliance: FCC Class A, IEC60065, EN61000 (see manual for specifics), CE, RoHS
Part number: ZvPro 620-NA, ZvPro 610-NA, ZvPro 620-EU, ZvPro 610-EU
Model name: ZvPro 620, ZvPro 610
Warranty: 2 years
The new I-Series of HD encoder/modulators has all the features of any ZvPro, PLUS simultaneous video-over-IP streaming — all with no compromise in performance.
IMPORTANT: A ZVPro cable must be purchased separately along with the ZVPRO 610 in order to connect a component or VGA device to the full-sized DIN input. See below for Accessories and Related items.
Based on the same architecture as their big brothers (HDbridge 2000 Series encoder/modulators), ZvPro models pack powerful features into a small space. At only 1RU high and shelf or rack mountable, it takes just one ZvPro to create a digital TV channel and broadcast it throughout your entire facility.
FEATURES
- Hydra cables with 7 inputs (component HD video, analog and digital audio) for clean wiring, easy diagnostics and maximum flexibility
- VGA with analog audio input
IDEAL USES
VIDEO INPUT
AUDIO INPUT
VIDEO ENCODER
AUDIO ENCODER
MODULATOR / UPCONVERTER
- 2 kHz resolution
- +/- 30 ppm accuracy
- +/- 35 ppm stability
CONTROL / SETUP
- 10/100 mb Ethernet via RJ45 connection
- IP address via DHCP or set by user
- HTML/Javascript served web interface for easy configuration
- Telnet connection for CLI scripting
- Easy firmware updates
- All settings saved in NV storage
GENERAL