NOTE: The HDB2540 ships with four 3 ft. Hydra AV cables.
HDbridge™ 2000 Series encoder / modulators are designed especially for high channel density environments where rapid deployment, advanced management and compatibility are critical — you can practically feel the confidence that's built into every unit!
FEATURES
A/V CaptureFour Component video inputs - 720p, 480p/i
Integrated Closed Caption support
Analog and Digital Audio
Digital MPEG2 Encoding
Up to 36Mbps sustained average encoding rate
Audio encoded into AC-3
User-settable program information
RF Modulation / Channel Upconversion
Well-formed QAM 256 6Mhz channel, inserted onto any blank channel
Independently Frequency agile from 50 to 858Mhz (Channels 2-135)
Supports STD, HRC or IRC cable standards
SPECIFICATIONS
Video Input
Component Video x2 or x4: DIN connector HDbridge end, RCA connectors for HD source
Closed Caption: EIA/CEA-608 captions accepted over composite video input
Audio Input
Stereo Analog and Digital Audio x2 or x4: DIN connector HDbridge end, RCA connector, 75 Ohm 0 to 0.7v at Audio source
Internally encoded into Dolby® Digital AC-3
Video Encoder
Encoder Video Profile: MPEG2 HD Profile 2: ISO13818-2 MP@HL
Traffic Shaping: Variable Bit Rate
Video Transport Bit Rate: 38.78 Mbps
Video Encoding Data Rates: Variable, 10 Mbs - 24 Mbs per channel
Average Encoding Data Rate: 18 Mbs per channel
Encoding Latency: Programmable 100 msec to 400 msec
Color Profile: 4:2:0
GOP Size: 16
Video, Audio PID: Programmable
Program Information: Programmable
Audio EncoderEncoder Audio Profile: ATSC A/52, Dolby(r) Digital (AC-3)
Modulator/Upconverter
Modulation Types: QAM 256 (ITU-T J83 Annex B) Interleaving modes: (64,2) only
Cable Standard: HRC, IRC or STD
Frequency Range: Independently Frequency Agile from 54 to 864MHz (Channels 2-135)
-2 kHz resolution
-+/- 30 ppm accuracy
-+/- 35 ppm stability
Output Power: +45 dBmV typical
Output Level Adjust: 25 - 45 dBmV in 1dBmV steps
MER: 38 dB typical
I/Q Amplitude Imbalance: < 1% typical
Spectral Tilt: <= 1dB over 6MHz typical
Control/Setup
Network interface: 10/100 mb Ethernet via RJ45 connection
IP address via DHCP or set by user
HTML/Javascript served web interface for easy configuration
Telnet connection for CLI scripting
Easy firmware updates
All settings saved in NV storage
Front Panel Color Display: Quickly obtain status at a glance
General
Power: 100-240VAC 50/60Hz, 60W max. 30W Typical. IEC 60320-C14
Cooling: Dual Internal cooling fans, Front Inlet, Rear Exhaust
Mounting: Rack ears shipped attached. 1RU high
Enclosure Type: Metal
Enclosure Dimensions: 1.72" H x 17.33" W (without rack mount ears) x 9.9" D
System Weight: 6.25lb (2.84 kg)
Temperature/Humidity: Operating +32F to +113F (0C to +45C) / 10% to 80%, non-condensing
Vibration: NSTA 1A in carton
MTBF: 45,000 hours
Compliance: FCC Class A
Warranty: 2 years
HDbridge™ 2000 Series encoder / modulators are designed especially for high channel density environments where rapid deployment, advanced management and compatibility are critical — you can practically feel the confidence that's built into every unit!
FEATURES
A/V Capture
RF Modulation / Channel Upconversion
SPECIFICATIONS
Video Input
Audio Input
Internally encoded into Dolby® Digital AC-3
Video Encoder
Audio EncoderEncoder Audio Profile: ATSC A/52, Dolby(r) Digital (AC-3)
Modulator/Upconverter
-2 kHz resolution
-+/- 30 ppm accuracy
-+/- 35 ppm stability
Control/Setup
IP address via DHCP or set by user
HTML/Javascript served web interface for easy configuration
Telnet connection for CLI scripting
Easy firmware updates
All settings saved in NV storage
General