ISHOT EM18624
ISHOT EM18624
ISHOT EM18624 XBlock 3G-SDI / HD-SDI Interface Board Kit for Sony, Panasonic and Sentech STC-AF243 H

ISHOT EM18624 XBlock 3G-SDI / HD-SDI Interface Board Kit for Sony, Panasonic and Sentech STC-AF243 H

ISHOT

ITEM SHIPS DIRECTLY FROM MANUFACTURER. WE WILL NOTIFY YOU IF IT IS NOT AVAILABLE FOR SHIPMENT.
The 3GSDI / HD-SDI Interface board provides camera control for the Sony FCB EV Series of Block Cameras and HDSDI camera control for the EH Block cameras. Depending on the camera model, component and SD composite analog video outputs are available. The camera video standard is coded with switches and a serial link (RS232 or TTL level) allowing control of camera and audio setting. 6 to 12V DC camera power supply.

3GSDI/HDSDI Interface board Kit includes interface board, BNC to MCX cable, right angle black anodized aluminum plate, 10 Pin Harness 8.25 inches, 2 Pin Harness 8.25 inches, Ribbon Cable 6.075 inches, 30 Pin Kel Cable 5 inches, 10 screws, and 3 standoffs.

FEATURES
  • SMPTE-424M 3G HDSDI Digital Interface
  • BNC to MCX cable
  • Automatic SONY camera recognition
  • Analog HD and SD video output.
  • Enhanced HDSDI signal quality : LOW jitter
  • Video format selection by micro switch.
  • Embedded Color bar & pathologic charts &
  • Embedded cross reticule
  • TTL or RS232 VISCA dialog level.
  • 6 to 12 VDC protected and EMC filtered power supply for interface and camera

    Technical Characteristics

    LVDS Video Input
  • 4 pairs data LVDS signals and 1 pair clock signal (74,25MHz)
  • Y Cb/Cr 8 bit coding + HVF synchros
  • Video formats : 1080p59,97/50, 1080P29.94/25, 1080i50/60, 720p 50/60, 1080p25/30, 720p25/30 according to camera model
  • KEL USL30 pin connector

    Analog audio inputs ( option)
  • Two audio channels : Line or microphone level (RS control)
  • Line input (47k ohm impedance) :
    - 0 dBu analog input level for -18dBFS SDI level
    - gain setting from -97dB to + 30dB
  • Microphone input :
    - DC bias voltage up to 2.3V for electret microphones
    - maximal gain :+63dB
  • Fonctions (RS control) : Constant recording volume - Automatic level control (ALC), 2 channels mixing
  • 24bit, 48kHz analog to digital conversion
  • Frequency response : 20Hz – 20kHz +/- x.xdB
  • Noise: -xxxdB
  • Molex 1.25mm 5 pin connector

    HDSDI video output
  • 8 bit SDI signal 800mV pp, 75 ohm impedance compliant to SMPTE 424M and 292M
  • Same video format as camera
  • Rate : HD = 2.970 Gb/s & 1.485Gb/s.
  • Option 2 audio channels embedded on group 1 (SDI)
  • BNC, SMB or MCX 75 ohm connector

    Analog video output
  • YPbPr and CVBS according to camera
  • Molex 1.25mm 10 pin connector

    Serial control
  • TTL (3V3) or RS232 level
  • Molex 1.25mm 10 pin connector

    Miscellaneous
  • 6 to 12V DC power supply, about 5W consumption with camera
  • Board dimensions : 45mm x 48mm, 3 mounting holes diam. 2.5mm

    Specifications
  • DIGITAL video output: 3G HDSDI SMPTE 424 M, HDSDI 292 M
  • Analog video output: Y, Pb , Pr 75 ohms, 1V .
  • Video output standard configuration: Micro switches
  • Camera setting: RS232 , RX , TX , VISCA
  • Connector: BNC , (SMB, MCX.: OPTIONS)
  • Power: 6 to 12 VDC, 6 W ( including camera) 5V for SE 600
  • Environmental: 0°C to 60°C
  • Storage: -20°C to 60°C
  • Regulation: EMC FCC part 15, PCB : UL