CAD M179 Large Diaphragm Variable Polar Pattern Condenser Microphone
CAD M179 Large Diaphragm Variable Polar Pattern Condenser Microphone
CAD M179 Large Diaphragm Variable Polar Pattern Condenser Microphone
CAD M179 Large Diaphragm Variable Polar Pattern Condenser Microphone
CAD M179 Large Diaphragm Variable Polar Pattern Condenser Microphone

CAD M179 Large Diaphragm Variable Polar Pattern Condenser Microphone

CAD AUDIO

FREE Ground Shipping

OUT OF STOCK

The CAD M179 combines a vintage capsule design with advanced electronics. The M179 features the dual pattern version of the original equitek e-300 capsule, an externally biased capsule with a gold sputtered 1.1" diaphragm.

FEATURES

  • Continuously variable pattern with a "hard" cardioid center detent.
  • Large 1.1" dual diaphragm external bias condenser capsule.
  • Gold sputtered diaphragms.
  • High SPL capability (143 dB SPL with pad)
  • Transformerless balanced output circuits.
  • 20 dB non-capacitive pad
  • 6dB/Octave @ 100Hz high-pass filter
  • Stainless steel internal pop/EMI filter.

    • SPECIFICATIONS

  • Type: Side address, external bias condenser
  • Frequency Response: 10-20 kHz
  • Polar Pattern: Variable
  • Impedance: 200 ohms
  • Sensitivity: -36 dBV (16mV) @ 1Pa
  • Equivalent Noise Level: 11 dB-A
  • Maximum SPL: 143 dB SPL (with pad)
  • Total Harmonic Distortion: Less than 0.15%
  • Switches: High-pass filter, 20dB pad. High-Pass Filter, 100Hz, 6dB/octave
  • Powering: Minimum requirements are 24-52V phantom power capable of delivering at least 8 mA.
  • Connector: Three pin male XLR type.
  • Finish: Durable charcoal gray urethane. Satin nickle plated front & rear screen. Dimensions: 2.25” (57.2 mm) Dia., x 7.00” (177.8 mm) High